*** UNIX MANUAL PAGE BROWSER ***

WAPBL(9) FreeBSD Kernel Developer's Manual WAPBL(9) NAME WAPBL, wapbl_start, wapbl_stop, wapbl_begin, wapbl_end, wapbl_flush, wapbl_discard, wapbl_add_buf, wapbl_remove_buf, wapbl_resize_buf, wapbl_register_inode, wapbl_unregister_inode, wapbl_register_deallocation, wapbl_jlock_assert, wapbl_junlock_assert - write-ahead physical block logging for file systems SYNOPSIS #include <sys/wapbl.h> typedef void (*wapbl_flush_fn_t)(struct mount *, daddr_t *, int *, int); int wapbl_start(struct wapbl **wlp, struct mount *mp, struct vnode *devvp, daddr_t off, size_t count, size_t blksize, struct wapbl_replay *wr, wapbl_flush_fn_t flushfn, wapbl_flush_fn_t flushabortfn); int wapbl_stop(struct wapbl *wl, int force); int wapbl_begin(struct wapbl *wl, const char *file, int line); void wapbl_end(struct wapbl *wl); int wapbl_flush(struct wapbl *wl, int wait); void wapbl_discard(struct wapbl *wl); void wapbl_add_buf(struct wapbl *wl, struct buf *bp); void wapbl_remove_buf(struct wapbl *wl, struct buf *bp); void wapbl_resize_buf(struct wapbl *wl, struct buf *bp, long oldsz, long oldcnt); void wapbl_register_inode(struct wapbl *wl, ino_t ino, mode_t mode); void wapbl_unregister_inode(struct wapbl *wl, ino_t ino, mode_t mode); void wapbl_register_deallocation(struct wapbl *wl, daddr_t blk, int len); void wapbl_jlock_assert(struct wapbl *wl); void wapbl_junlock_assert(struct wapbl *wl); DESCRIPTION WAPBL, or write-ahead physical block logging, is an abstraction for file systems to write physical blocks in the buffercache(9) to a bounded-size log first before their real destinations on disk. The name means: logging batches of writes are issued atomically via a log physical block only physical blocks, not logical file system operations, are stored in the log write-ahead before writing a block to disk, its new content, rather than its old content for roll-back, is recorded in the log When a file system using WAPBL issues writes (as in bwrite(9) or bdwrite(9)), they are grouped in batches called transactions in memory, which are serialized to be consistent with program order before WAPBL submits them to disk atomically. Thus, within a transaction, after one write, another write need not wait for disk I/O, and if the system is interrupted, e.g. by a crash or by power failure, either both writes will appear on disk, or neither will. When a transaction is full, it is written to a circular buffer on disk called the log. When the transaction has been written to disk, every write in the transaction is submitted to disk asynchronously. Finally, the file system may issue new writes via WAPBL once enough writes submitted to disk have completed. After interruption, such as a crash or power failure, some writes issued by the file system may not have completed. However, the log is written consistently with program order and before file system writes are submitted to disk. Hence a consistent program-order view of the file system can be attained by resubmitting the writes that were successfully stored in the log using wapbl_replay(9). This may not be the same state just before interruption -- writes in transactions that did not reach the disk will be excluded. For a file system to use WAPBL, its VFS_MOUNT(9) method should first replay any journal on disk using wapbl_replay(9), and then, if the mount is read/write, initialize WAPBL for the mount by calling wapbl_start(). The VFS_UNMOUNT(9) method should call wapbl_stop(). Before issuing any buffercache(9) writes, the file system must acquire a shared lock on the current WAPBL transaction with wapbl_begin(), which may sleep until there is room in the transaction for new writes. After issuing the writes, the file system must release its shared lock on the transaction with wapbl_end(). Either all writes issued between wapbl_begin() and wapbl_end() will complete, or none of them will. File systems may also witness an exclusive lock on the current transaction when WAPBL is flushing the transaction to disk, or aborting a flush, and invokes a file system's callback. File systems can assert that the transaction is locked with wapbl_jlock_assert(), or not exclusively locked, with wapbl_junlock_assert(). If a file system requires multiple transactions to initialize an inode, and needs to destroy partially initialized inodes during replay, it can register them by ino_t inode number before initialization with wapbl_register_inode() and unregister them with wapbl_unregister_inode() once initialization is complete. WAPBL does not actually concern itself whether the objects identified by ino_t values are `inodes' or `quaggas' or anything else -- file systems may use this to list any objects keyed by ino_t value in the log. When a file system frees resources on disk and issues writes to reflect the fact, it cannot then reuse the resources until the writes have reached the disk. However, as far as the buffercache(9) is concerned, as soon as the file system issues the writes, they will appear to have been written. So the file system must not attempt to reuse the resource until the current WAPBL transaction has been flushed to disk. The file system can defer freeing a resource by calling wapbl_register_deallocation() to record the disk address of the resource and length in bytes of the resource. Then, when WAPBL next flushes the transaction to disk, it will pass an array of the disk addresses and lengths in bytes to a file-system-supplied callback. (Again, WAPBL does not care whether the `disk address' or `length in bytes' is actually that; it will pass along daddr_t and int values.) FUNCTIONS wapbl_start(wlp, mp, devvp, off, count, blksize, wr, flushfn, flushabortfn) Start using WAPBL for the file system mounted at mp, storing a log of count disk sectors at disk address off on the block device devvp writing blocks in units of blksize bytes. On success, stores an opaque struct wapbl * cookie in *wlp for use with the other WAPBL routines and returns zero. On failure, returns an error number. If the file system had replayed the log with wapbl_replay(9), then wr must be the struct wapbl_replay * cookie used to replay it, and wapbl_start() will register any inodes that were in the log as if with wapbl_register_inode(); otherwise wr must be NULL. flushfn is a callback that WAPBL will invoke as flushfn (mp, deallocblks, dealloclens, dealloccnt) just before it flushes a transaction to disk, with the an exclusive lock held on the transaction, where mp is the mount point passed to wapbl_start(), deallocblks is an array of dealloccnt disk addresses, and dealloclens is an array of dealloccnt lengths, corresponding to the addresses and lengths the file system passed to wapbl_register_deallocation(). If flushing the transaction to disk fails, WAPBL will call flushabortfn with the same arguments to undo any effects that flushfn had. wapbl_stop(wl, force) Flush the current transaction to disk and stop using WAPBL. If flushing the transaction fails and force is zero, return error. If flushing the transaction fails and force is nonzero, discard the transaction, permanently losing any writes in it. If flushing the transaction is successful or if force is nonzero, free memory associated with wl and return zero. wapbl_begin(wl, file, line) Wait for space in the current transaction for new writes, flushing it if necessary, and acquire a shared lock on it. The lock is not exclusive: other threads may acquire shared locks on the transaction too. The lock is not recursive: a thread may not acquire it again without calling wapbl_end first. May sleep. file and line are the file name and line number of the caller for debugging purposes. wapbl_end(wl) Release a shared lock on the transaction acquired with wapbl_begin(). wapbl_flush(wl, wait) Flush the current transaction to disk. If wait is nonzero, wait for all writes in the current transaction to complete. The current transaction must not be locked. wapbl_discard(wl) Discard the current transaction, permanently losing any writes in it. The current transaction must not be locked. wapbl_add_buf(wl, bp) Add the buffer bp to the current transaction, which must be locked, because someone has asked to write it. This is meant to be called from within buffercache(9), not by file systems directly. wapbl_remove_buf(wl, bp) Remove the buffer bp, which must have been added using wapbl_add_buf, from the current transaction, which must be locked, because it has been invalidated (or XXX ???). This is meant to be called from within buffercache(9), not by file systems directly. wapbl_resize_buf(wl, bp, oldsz, oldcnt) Note that the buffer bp, which must have been added using wapbl_add_buf, has changed size, where oldsz is the previous allocated size in bytes and oldcnt is the previous number of valid bytes in bp. This is meant to be called from within buffercache(9), not by file systems directly. wapbl_register_inode(wl, ino, mode) Register ino with the mode mode as commencing initialization. wapbl_unregister_inode(wl, ino, mode) Unregister ino, which must have previously been registered with wapbl_register_inode using the same mode, now that its initialization has completed. wapbl_register_deallocation(wl, blk, len) Register len bytes at the disk address blk as ready for deallocation, so that they will be passed to the flushfn that was given to wapbl_start(). wapbl_jlock_assert(wl) Assert that the current transaction is locked. Note that it might not be locked by the current thread: this assertion passes if any thread has it locked. wapbl_junlock_assert(wl) Assert that the current transaction is not exclusively locked by the current thread. Users of WAPBL observe exclusive locks only in the flushfn and flushabortfn callbacks to wapbl_start(). Outside of such contexts, the transaction is never exclusively locked, even between wapbl_begin() and wapbl_end(). There is no way to assert that the current transaction is not locked at all -- i.e., that the caller may acquire a shared lock on the transaction with wapbl_begin() without danger of deadlock. CODE REFERENCES The WAPBL subsystem is implemented in sys/kern/vfs_wapbl.c, with hooks in sys/kern/vfs_bio.c. SEE ALSO buffercache(9), vfsops(9), wapbl_replay(9) BUGS WAPBL works only for file system metadata managed via the buffercache(9), and provides no way to log writes via the page cache, as in VOP_GETPAGES(9), VOP_PUTPAGES(9), and ubc_uiomove(9), which is normally used for file data. Not only is WAPBL unable to log writes via the page cache, it is also unable to defer buffercache(9) writes until cached pages have been written. This manifests as the well-known garbage-data-appended-after- crash bug in FFS: when appending to a file, the pages containing new data may not reach the disk before the inode update reporting its new size. After a crash, the inode update will be on disk, but the new data will not be -- instead, whatever garbage data in the free space will appear to have been appended to the file. WAPBL exacerbates the problem by increasing the throughput of metadata writes, because it can issue many metadata writes asynchronously that FFS without WAPBL would need to issue synchronously in order for fsck(8) to work. The criteria for when the transaction must be flushed to disk before wapbl_begin() returns are heuristic, i.e. wrong. There is no way for a file system to communicate to wapbl_begin() how many buffers, inodes, and deallocations it will issue via WAPBL in the transaction. WAPBL mainly supports write-ahead, and has only limited support for rolling back operations, in the form of wapbl_register_inode() and wapbl_unregister_inode(). Consequently, for example, large writes appending to a file, which requires multiple disk block allocations and an inode update, must occur in a single transaction -- there is no way to roll back the disk block allocations if the write fails in the middle, e.g. because of a fault in the middle of the user buffer. wapbl_jlock_assert() does not guarantee that the current thread has the current transaction locked. wapbl_junlock_assert() does not guarantee that the current thread does not have the current transaction locked at all. There is only one WAPBL transaction for each file system at any given time, and only one WAPBL log on disk. Consequently, all writes are serialized. Extending WAPBL to support multiple logs per file system, partitioned according to an appropriate scheme, is left as an exercise for the reader. There is no reason for WAPBL to require its own hooks in buffercache(9). The on-disk format used by WAPBL is undocumented. FreeBSD 14.1-RELEASE-p8 March 26, 2015 FreeBSD 14.1-RELEASE-p8